View B41851F8686M000_3306145.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

aluminum electrolytic capacitors single-ended capacitors series/type: b41851, b43851 date: december 2006 ? epcos ag 2007. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
general-purpose grade capacitors applications general-purpose applications in the entertainment industry semi-professional to professional application range for filtering, coupling and pulse circuits switched-mode power supplies features compact dimensions high cv product, i.e. very compact construction radial leads charge-discharge proof, polar aluminum case with insulating sleeve minus pole marking on the insulating sleeve case with safety vent from diameter 6.3 mm delivery mode terminal configurations and packing: bulk taped, ammo pack cut kinked papr (protection against polarity reversal): crimped leads, j leads, bent leads refer to chapter "single-ended capacitors taping, packing and lead configurations" for further details and ordering example. single-ended capacitors b41851, b43851 standard series 105 c page 2 of 36 please read cautions and warnings and important notes at the end of this document.
specifications and characteristics in brief series b41851 b43851 rated voltage v r 6.3 ... 100 v dc 160 ... 450 v dc surge voltage v s 1.15 v r 1.1 v r rated capacitance c r 0.1 ... 10000 f 0.47 ... 560 f capacitance tolerance 20% m 20% m dissipation factor tan d (20 c, 120 hz) for capacitance higher than 1000 f add 0.02 for every increase of 1000 f. v r (v dc) 6.3 10 16 25 35 50 63 100 160 ... 450 tan d (max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10 0.20 leakage current i leak (20 c, 5 min) or 3 a, whichever is greater self-inductance esl diameter (mm) 6.3 8 ... 12.5 16 18 20 ... 25 esl (nh) 15 20 26 34 40 useful life 105 c, v r , i ac,r > 2000 h > 3000 h 40 c, v r , 1.8 i ac,r > 250000 h 40 c, v r , 2.1 i ac,r > 250000 h requirements d c/c 45% of initial value tan d 3 times initial specified limit i leak initial specified limit voltage endurance test 105 c, v r 1000 h 1000 h post test requirements d c/c 30% of initial value tan d 2 times initial specified limit i leak initial specified limit vibration resistance test to iec 60068-2-6, test fc: displacement amplitude 0.75 mm, frequency range 10 ... 2000 hz, acceleration max. 20 g, duration 3 2 h. capacitor rigidly clamped by the aluminum case. iec climatic category to iec 60068-1: v r 250 v: 40/105/56 ( 40 c/+105 c/56 days damp heat test) v r 3 350 v: 25/105/56 ( 25 c/+105 c/56 days damp heat test) sectional specification iec 60384-4 b41851, b43851 standard series 105 c page 3 of 36 please read cautions and warnings and important notes at the end of this document.
dimensional drawings with stand-off rubber seal diameters (mm): 6.3, 8, 10, 12.5, 16, 18, 22, 25 with flat rubber seal diameters (mm): 5, 8, 20 safety vent for diameter 3 6.3 mm. dimensions and weights dimensions (mm) approx. weight d +0.5 l a 0.5 b g 5 11 +1.0 2.0 0.50 0.05 0.5 6.3 11 +1.0 2.5 0.50 0.05 0.7 8 11.5 +1.5 3.5 0.60 0.05 1.0 10 12.5 +1.0 5.0 0.60 0.05 1.6 10 16 +1.0 5.0 0.60 0.05 1.9 10 20 +2.0 5.0 0.60 0.05 2.6 12.5 20 +2.0 5.0 0.60 0.05 3.6 12.5 25 +2.0 5.0 0.60 0.05 4.5 16 20 +2.0 7.5 0.80 0.05 5.5 16 25 +2.0 7.5 0.80 0.05 7.5 16 31.5 +2.0 7.5 0.80 0.05 7.8 18 31.5 +2.0 7.5 0.80 0.1 11.0 18 35 +2.0 7.5 0.80 0.1 13.0 18 40 +2.0 7.5 0.80 0.1 16.0 20 30 +2.0 10.0 1.0 0.1 14.0 20 35 +2.0 10.0 1.0 0.1 18.0 20 40 +2.0 10.0 1.0 0.1 20.0 22 35 +2.0 10.0 1.0 0.1 21.0 22 40 +2.0 10.0 1.0 0.1 23.0 25 40 +2.0 12.5 1.0 0.1 25.0 b41851, b43851 standard series 105 c page 4 of 36 please read cautions and warnings and important notes at the end of this document.
overview of available types b41851 other voltage and capacitance ratings are available upon request. v r (v dc) 6.3 10 16 25 case dimensions d l (mm) c r ( m f) 47 5 11 68 5 11 100 5 11 5 11 6.3 11 150 6.3 11 6.3 11 6.3 11 220 6.3 11 6.3 11 6.3 11 8 11.5 270 6.3 11 6.3 11 8 11.5 8 11.5 330 6.3 11 8 11.5 8 11.5 8 11.5 10 12.5 470 8 11.5 8 11.5 8 11.5 10 12.5 560 8 11.5 8 11.5 10 12.5 10 16 680 10 12.5 10 12.5 10 12.5 10 16 1000 10 12.5 10 12.5 10 16 10 20 1500 10 16 10 20 10 20 12.5 20 2200 10 20 10 20 12.5 20 12.5 25 3300 10 20 12.5 25 12.5 25 16 25 16 25 4700 12.5 25 16 20 16 25 16 31.5 6800 16 25 16 31.5 18 31.5 18 35 8200 16 31.5 18 31.5 18 40 10000 18 31.5 18 35 20 40 b41851 standard series 105 c page 5 of 36 please read cautions and warnings and important notes at the end of this document.
v r (v dc) 35 50 63 100 case dimensions d l (mm) c r ( m f) 0.10 5 11 0.22 5 11 0.33 5 11 0.47 5 11 0.68 5 11 1.0 5 11 5 11 1.5 5 11 2.2 5 11 5 11 3.3 5 11 5 11 4.7 5 11 5 11 6.8 5 11 10 5 11 5 11 6.3 11 22 5 11 5 11 6.3 11 8 11.5 33 5 11 6.3 11 6.3 11 10 12.5 47 5 11 6.3 11 6.3 11 8 11.5 10 12.5 68 6.3 11 6.3 11 8 11.5 10 16 100 6.3 11 8 11.5 8 11.5 10 20 150 8 11.5 8 11.5 10 12.5 12.5 25 220 8 11.5 10 12.5 10 16 12.5 25 270 10 12.5 10 16 10 20 16 25 330 10 12.5 10 16 10 20 16 25 470 10 16 10 20 12.5 20 12.5 25 16 31.5 560 10 20 12.5 20 12.5 25 16 31.5 680 10 20 12.5 20 16 20 18 40 1000 12.5 20 12.5 25 16 25 16 31.5 20 40 1500 16 20 16 25 18 31.5 2200 16 25 16 31.5 18 35 18 35 18 40 3300 16 31.5 18 35 20 40 4700 18 35 20 40 25 40 6800 18 40 b41851 standard series 105 c page 6 of 36 please read cautions and warnings and important notes at the end of this document.
overview of available types b43851 other voltage and capacitance ratings are available upon request. v r (v dc) 160 200 250 350 400 450 case dimensions d l (mm) c r ( m f) 0.47 6.3 11 6.3 11 6.3 11 6.3 11 0.68 6.3 11 6.3 11 6.3 11 6.3 11 1.0 6.3 11 6.3 11 6.3 11 6.3 11 1.5 6.3 11 6.3 11 6.3 11 8 11.5 2.2 6.3 11 6.3 11 6.3 11 8 11.5 10 12.5 10 12.5 3.3 6.3 11 6.3 11 8 11.5 10 12.5 10 12.5 10 16 4.7 6.3 11 8 11.5 8 11.5 10 12.5 10 16 10 16 10 20 6.8 8 11.5 10 12.5 10 12.5 10 16 10 16 10 20 10 8 11.5 10 12.5 10 12.5 10 16 10 20 10 20 10 20 12.5 25 22 10 12.5 10 16 10 16 10 20 10 20 12.5 25 12.5 25 12.5 25 16 25 33 10 16 10 20 10 20 12.5 20 12.5 25 16 20 16 25 16 31.5 47 12.5 20 12.5 25 12.5 20 12.5 25 12.5 25 16 20 16 25 16 25 16 31.5 16 31.5 18 31.5 68 12.5 25 16 20 12.5 25 16 20 16 25 18 31.5 18 31.5 18 35 18 35 100 12.5 25 16 25 16 25 16 31.5 18 35 20 30 20 35 20 40 150 16 31.5 18 31.5 18 40 20 40 20 40 220 16 31.5 18 31.5 18 35 18 40 270 18 35 18 40 20 35 22 35 330 18 35 20 30 22 35 22 40 470 22 35 560 22 40 b43851 standard series 105 c page 7 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 6.3 v dc 220 6.3 11 2.1 1.6 1.5 160 225 b41851a2227m*** 270 6.3 11 1.7 1.3 1.2 175 245 b41851a2277m*** 330 6.3 11 1.4 1.1 1.0 195 275 b41851a2337m*** 470 8 11.5 1.0 0.77 0.71 265 370 b41851a2477m*** 560 8 11.5 0.83 0.64 0.59 290 405 b41851a2567m*** 680 10 12.5 0.68 0.52 0.49 360 505 b41851a2687m*** 1000 10 12.5 0.46 0.35 0.33 455 635 b41851a2108m*** 1500 10 16 0.31 0.24 0.22 525 735 b41851f2158m*** 2200 10 20 0.23 0.18 0.16 710 995 b41851a2228m*** 3300 10 20 0.16 0.12 0.11 840 1175 b41851a2338m*** 4700 12.5 25 0.12 0.09 0.09 1120 1570 b41851a2478m*** v r = 10 v dc 100 5 11 4.0 3.1 2.90 105 150 b41851a3107m*** 150 6.3 11 2.7 2.1 1.90 115 160 b41851a3157m*** 220 6.3 11 1.8 1.4 1.30 175 245 b41851a3227m*** 270 6.3 11 1.5 1.2 1.10 180 250 b41851a3277m*** 330 8 11.5 1.2 0.92 0.86 220 310 b41851a3337m*** 470 8 11.5 0.85 0.65 0.61 280 390 b41851a3477m*** 560 8 11.5 0.71 0.55 0.51 290 405 b41851b3567m*** 680 10 12.5 0.59 0.45 0.42 330 460 b41851a3687m*** 1000 10 12.5 0.40 0.31 0.29 460 645 b41851a3108m*** 1500 10 20 0.27 0.21 0.19 510 715 b41851a3158m*** 2200 10 20 0.20 0.15 0.14 760 1065 b41851a3228m*** 3300 12.5 25 0.14 0.11 0.10 1085 1520 b41851a3338m*** 4700 16 20 0.11 0.08 0.08 1190 1665 b41851a3478m*** 6800 16 25 0.08 0.06 0.06 1575 2205 b41851f3688m*** 8200 16 31.5 0.08 0.06 0.06 1610 2255 b41851f3828m*** 10000 18 31.5 0.07 0.05 0.05 1820 2250 b41851f3109m*** b41851 standard series 105 c page 8 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 16 v dc 68 5 11 4.9 3.8 3.50 70 100 b41851a4686m*** 100 5 11 3.3 2.6 2.40 115 160 b41851a4107m*** 150 6.3 11 2.2 1.7 1.60 125 175 b41851a4157m*** 220 6.3 11 1.5 1.2 1.10 190 265 b41851f4227m*** 270 8 11.5 1.2 0.94 0.88 195 275 b41851a4277m*** 330 8 11.5 1.0 0.77 0.72 265 370 b41851a4337m*** 470 8 11.5 0.71 0.54 0.50 315 440 b41851k4477m*** 560 10 12.5 0.59 0.46 0.42 360 505 b41851a4567m*** 680 10 12.5 0.49 0.38 0.35 390 545 b41851f4687m*** 1000 10 16 0.33 0.26 0.24 560 785 b41851a4108m*** 1500 10 20 0.22 0.17 0.16 650 910 b41851f4158m*** 2200 12.5 20 0.17 0.13 0.12 920 1290 b41851f4228m*** 3300 12.5 25 0.12 0.09 0.09 1170 1640 b41851f4338m*** 3300 16 25 0.12 0.09 0.09 1260 1765 b41851a4338m*** 4700 16 25 0.09 0.07 0.07 1500 2100 b41851a4478m*** 6800 16 31.5 0.07 0.06 0.05 1600 2240 b41851f4688m*** 6800 18 31.5 0.07 0.06 0.05 1680 2350 b41851a4688m*** 8200 18 31.5 0.07 0.05 0.05 1700 2380 b41851f4828m*** 10000 18 35 0.06 0.05 0.04 1950 2730 b41851f4109m*** v r = 25 v dc 47 5 11 5.6 4.3 4.0 83 116 b41851a5476m*** 100 6.3 11 2.7 2.0 1.9 140 195 b41851a5107m*** 150 6.3 11 1.8 1.4 1.3 145 205 b41851f5157m*** 220 8 11.5 1.2 0.93 0.86 240 335 b41851a5227m*** 270 8 11.5 1.0 0.76 0.70 250 350 b41851a5277m*** 330 8 11.5 0.80 0.62 0.57 310 435 b41851f5337m*** 330 10 12.5 0.80 0.62 0.57 320 450 b41851a5337m*** 470 10 12.5 0.56 0.43 0.40 380 530 b41851f5477m*** b41851 standard series 105 c page 9 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 25 v dc 560 10 16 0.47 0.36 0.34 400 560 b41851a5567m*** 680 10 16 0.39 0.30 0.28 440 615 b41851f5687m*** 1000 10 20 0.27 0.20 0.19 680 950 b41851a5108m*** 1500 12.5 20 0.18 0.14 0.13 770 1080 b41851f5158m*** 2200 12.5 25 0.14 0.10 0.10 1090 1525 b41851f5228m*** 3300 16 25 0.10 0.08 0.07 1400 1960 b41851a5338m*** 4700 16 31.5 0.08 0.06 0.06 1700 2380 b41851a5478m*** 6800 18 35 0.06 0.05 0.05 1850 2590 b41851f5688m*** 8200 18 40 0.06 0.05 0.04 1900 2660 b41851f5828m*** 10000 20 40 0.06 0.04 0.04 2050 2870 b41851f5109m*** v r = 35 v dc 33 5 11 7.0 5.40 5.0 75 105 b41851a7336m*** 47 5 11 4.9 3.80 3.5 93 130 b41851a7476m*** 68 6.3 11 3.4 2.60 2.4 110 155 b41851a7686m*** 100 6.3 11 2.3 1.80 1.7 150 210 b41851f7107m*** 150 8 11.5 1.5 1.20 1.1 210 295 b41851a7157m*** 220 8 11.5 1.1 0.81 0.75 270 380 b41851f7227m*** 270 10 12.5 0.86 0.66 0.61 300 420 b41851a7277m*** 330 10 12.5 0.70 0.54 0.50 350 490 b41851a7337m*** 470 10 16 0.49 0.38 0.35 460 645 b41851a7477m*** 560 10 20 0.41 0.32 0.30 540 755 b41851a7567m*** 680 10 20 0.34 0.26 0.24 590 825 b41851a7687m*** 1000 12.5 20 0.23 0.18 0.17 810 1135 b41851f7108m*** 1500 16 20 0.15 0.12 0.11 980 1370 b41851f7158m*** 2200 16 25 0.12 0.09 0.09 1260 1765 b41851f7228m*** 3300 16 31.5 0.09 0.07 0.06 1500 2100 b41851f7338m*** 4700 18 35 0.07 0.05 0.05 1780 2490 b41851k7478m*** 6800 18 40 0.06 0.05 0.04 2000 2800 b41851k7688m*** b41851 standard series 105 c page 10 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 50 v dc 1 5 11 199 153 142 13 18 b41851a6105m*** 2.2 5 11 90 69 64 20 28 b41851a6225m*** 3.3 5 11 60 46 43 25 35 b41851a6335m*** 4.7 5 11 42 32 30 30 42 b41851a6475m*** 10 5 11 20 15 14 46 65 b41851a6106m*** 22 5 11 9.0 7.0 6.5 67 94 b41851a6226m*** 33 6.3 11 6.0 4.6 4.3 90 126 b41851a6336m*** 47 6.3 11 4.2 3.3 3.0 115 160 b41851a6476m*** 68 6.3 11 2.9 2.3 2.1 150 210 b41851f6686m*** 100 8 11.5 2.0 1.5 1.4 190 265 b41851a6107m*** 150 8 11.5 1.3 1.0 0.95 210 295 b41851f6157m*** 220 10 12.5 0.90 0.70 0.65 300 420 b41851a6227m*** 270 10 16 0.74 0.57 0.53 360 505 b41851a6277m*** 330 10 16 0.60 0.46 0.43 410 575 b41851a6337m*** 470 10 20 0.42 0.33 0.30 540 755 b41851a6477m*** 560 12.5 20 0.36 0.27 0.25 651 910 b41851f6567m*** 680 12.5 20 0.29 0.23 0.21 700 980 b41851f6687m*** 1000 12.5 25 0.20 0.15 0.14 950 1330 b41851f6108m*** 1500 16 25 0.13 0.10 0.09 1260 1765 b41851f6158m*** 2200 16 31.5 0.11 0.08 0.08 1410 1975 b41851f6228m*** 2200 18 35 0.11 0.08 0.08 1540 2155 b41851a6228m*** 3300 18 35 0.08 0.06 0.06 1770 2480 b41851k6338m*** 4700 20 40 0.06 0.05 0.05 2100 2940 b41851k6478m*** b41851 standard series 105 c page 11 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 63 v dc 6.8 5 11 29 23 21 35 50 b41851a8685m*** 10 5 11 20 15 14 46 65 b41851a8106m*** 22 5 11 9.0 7.0 6.5 70 100 b41851f8226m*** 22 6.3 11 9.0 7.0 6.5 77 110 b41851a8226m*** 33 6.3 11 6.0 4.6 4.3 100 140 b41851a8336m*** 47 6.3 11 4.2 3.3 3.0 120 170 b41851f8476m*** 47 8 11.5 4.2 3.3 3.0 130 185 b41851a8476m*** 68 8 11.5 2.9 2.3 2.1 155 220 b41851f8686m*** 100 8 11.5 2.0 1.5 1.4 200 280 b41851f8107m*** 150 10 12.5 1.3 1.0 0.95 250 350 b41851f8157m*** 220 10 16 0.90 0.70 0.65 335 470 b41851a8227m*** 270 10 20 0.74 0.57 0.53 410 575 b41851a8277m*** 330 10 20 0.60 0.46 0.43 510 715 b41851a8337m*** 470 12.5 20 0.42 0.33 0.30 640 895 b41851f8477m*** 470 12.5 25 0.42 0.33 0.30 655 920 b41851a8477m*** 560 12.5 25 0.36 0.27 0.25 700 980 b41851f8567m*** 680 16 20 0.29 0.23 0.21 770 1080 b41851f8687m*** 1000 16 25 0.20 0.15 0.14 930 1300 b41851f8108m*** 1000 16 31.5 0.20 0.15 0.14 980 1375 b41851a8108m*** 1500 18 31.5 0.13 0.10 0.09 1260 1765 b41851f8158m*** 2200 18 35 0.11 0.08 0.08 1650 2310 b41851a8228m*** 2200 18 40 0.11 0.08 0.08 1650 2310 b41851f8228m*** 3300 20 40 0.08 0.06 0.06 1950 2730 b41851a8338m*** 4700 25 40 0.06 0.05 0.05 2250 3150 b41851f8478m*** b41851 standard series 105 c page 12 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b41851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 100 v dc 0.1 5 11 1658 1275 1184 1.5 2.1 b41851a9104m*** 0.22 5 11 754 580 538 3.4 4.8 b41851a9224m*** 0.33 5 11 502 386 359 5.0 7.0 b41851a9334m*** 0.47 5 11 353 271 252 7.1 10 b41851a9474m*** 0.68 5 11 244 188 174 9.1 13 b41851a9684m*** 1 5 11 166 128 118 15 21 b41851a9105m*** 1.5 5 11 111 85 79 17 24 b41851a9155m*** 2.2 5 11 75 58 54 21 30 b41851a9225m*** 3.3 5 11 50 39 36 29 41 b41851a9335m*** 4.7 5 11 35 27 25 32 45 b41851a9475m*** 10 6.3 11 17 13 12 53 74 b41851a9106m*** 22 8 11.5 7.5 5.8 5.4 98 137 b41851a9226m*** 33 10 12.5 5.0 3.9 3.6 135 190 b41851a9336m*** 47 10 12.5 3.5 2.7 2.5 160 225 b41851b9476m*** 68 10 16 2.4 1.9 1.7 195 275 b41851a9686m*** 100 10 20 1.7 1.3 1.2 245 345 b41851a9107m*** 150 12.5 25 1.1 0.85 0.79 385 540 b41851a9157m*** 220 12.5 25 0.75 0.58 0.54 435 610 b41851a9227m*** 270 16 25 0.61 0.47 0.44 540 755 b41851a9277m*** 330 16 25 0.50 0.39 0.36 560 785 b41851a9337m*** 470 16 31.5 0.35 0.27 0.25 700 980 b41851a9477m*** 560 16 31.5 0.30 0.23 0.21 735 1030 b41851a9567m*** 680 18 40 0.24 0.19 0.17 770 1080 b41851f9687m*** 1000 20 40 0.17 0.13 0.12 980 1370 b41851a9108m*** b41851 standard series 105 c page 13 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b43851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 160 v dc 0.47 6.3 11 395 296 158 11 19 b43851a1474m*** 0.68 6.3 11 273 205 109 13 22 b43851a1684m*** 1 6.3 11 186 139 74 16 27 b43851a1105m*** 1.5 6.3 11 124 93 50 21 36 b43851a1155m*** 2.2 6.3 11 85 63 34 23 39 b43851a1225m*** 3.3 6.3 11 56 42 22 28 48 b43851a1335m*** 4.7 6.3 11 40 30 16 35 60 b43851f1475m*** 6.8 8 11.5 27 21 11 46 78 b43851a1685m*** 10 8 11.5 18 14 7.4 56 95 b43851f1106m*** 22 10 12.5 13 9.5 5.0 91 155 b43851f1226m*** 22 10 16 8.4 6.3 3.4 108 184 b43851a1226m*** 33 10 16 7.5 5.6 3.0 125 213 b43851f1336m*** 33 10 20 5.6 4.2 2.2 143 243 b43851a1336m*** 47 12.5 20 4.5 3.4 1.8 188 320 b43851f1476m*** 47 12.5 25 4.0 3.0 1.6 203 345 b43851a1476m*** 68 12.5 25 2.7 2.1 1.1 245 417 b43851f1686m*** 68 16 20 2.7 2.1 1.1 255 434 b43851a1686m*** 100 12.5 25 2.3 1.7 0.92 300 510 b43851f1107m*** 100 16 25 1.8 1.4 0.74 332 564 b43851a1107m*** 150 16 31.5 1.2 0.92 0.49 420 714 b43851a1157m*** 220 16 31.5 0.95 0.71 0.38 532 904 b43851f1227m*** 220 18 31.5 0.84 0.63 0.34 560 952 b43851a1227m*** 270 18 35 0.75 0.56 0.30 630 1071 b43851f1277m*** 270 18 40 0.67 0.50 0.27 665 1131 b43851a1277m*** 330 18 35 0.70 0.53 0.28 695 1182 b43851f1337m*** 330 20 30 0.56 0.42 0.22 700 1190 b43851a1337m*** 470 22 35 0.40 0.30 0.16 910 1547 b43851a1477m*** 560 22 40 0.33 0.25 0.13 1050 1785 b43851a1567m*** b43851 standard series 105 c page 14 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b43851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 200 v dc 0.47 6.3 11 395 296 158 11 19 b43851a2474m*** 0.68 6.3 11 273 205 109 13 22 b43851a2684m*** 1 6.3 11 186 139 74 16 27 b43851a2105m*** 1.5 6.3 11 124 93 50 21 36 b43851a2155m*** 2.2 6.3 11 85 63 34 23 39 b43851a2225m*** 3.3 6.3 11 56 42 22 28 48 b43851a2335m*** 4.7 8 11.5 40 30 16 38 65 b43851a2475m*** 6.8 10 12.5 27 21 11 55 94 b43851a2685m*** 10 10 12.5 18 14 7.4 66 112 b43851b2106m*** 22 10 16 8.4 6.3 3.4 108 184 b43851k2226m*** 22 10 20 8.4 6.3 3.4 120 204 b43851a2226m*** 33 10 20 5.6 4.2 2.2 144 245 b43851b2336m*** 47 12.5 20 4.5 3.4 1.8 190 323 b43851k2476m*** 47 12.5 25 4.0 3.0 1.6 203 345 b43851a2476m*** 68 12.5 25 3.3 2.5 1.3 245 417 b43851k2686m*** 68 16 20 3.3 2.5 1.3 255 434 b43851a2686m*** 100 16 25 1.8 1.4 0.74 332 564 b43851a2107m*** 150 18 31.5 1.2 0.92 0.49 448 762 b43851a2157m*** 220 18 35 0.84 0.63 0.34 539 916 b43851a2227m*** 270 20 35 0.67 0.50 0.27 637 1083 b43851a2277m*** 330 22 35 0.56 0.42 0.22 742 1261 b43851a2337m*** b43851 standard series 105 c page 15 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b43851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 250 v dc 0.47 6.3 11 395 296 158 11 19 b43851f2474m*** 0.68 6.3 11 273 205 109 13 22 b43851f2684m*** 1 6.3 11 186 139 74 16 27 b43851f2105m*** 1.5 6.3 11 124 93 50 21 36 b43851f2155m*** 2.2 6.3 11 85 63 34 23 39 b43851f2225m*** 3.3 8 11.5 56 42 22 35 60 b43851f2335m*** 4.7 8 11.5 40 30 16 38 65 b43851k2475m*** 6.8 10 12.5 27 21 11 55 94 b43851f2685m*** 10 10 12.5 23 17 9.0 66 112 b43851k2106m*** 10 10 16 18 14 7.4 74 126 b43851f2106m*** 22 10 20 8.4 6.3 3.4 120 204 b43851f2226m*** 33 12.5 20 5.6 4.2 2.2 161 274 b43851k2336m*** 47 12.5 25 4.3 3.2 1.7 203 345 b43851g2476m*** 47 16 20 4.0 3.0 1.6 210 357 b43851f2476m*** 68 16 25 2.7 2.1 1.1 266 452 b43851f2686m*** 100 16 31.5 1.8 1.4 0.74 364 619 b43851k2107m*** 150 18 40 1.2 0.92 0.49 430 731 b43851f2157m*** 220 18 40 0.84 0.63 0.34 476 809 b43851f2227m*** 270 22 35 0.67 0.50 0.27 567 964 b43851f2277m*** 330 22 40 0.56 0.42 0.22 658 1119 b43851f2337m*** b43851 standard series 105 c page 16 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b43851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 350 v dc 0.47 6.3 11 395 296 158 10 17 b43851a4474m*** 0.68 6.3 11 273 205 109 12 20 b43851a4684m*** 1 6.3 11 186 139 74 15 26 b43851a4105m*** 1.5 8 11.5 124 93 50 22 37 b43851a4155m*** 2.2 8 11.5 85 63 34 26 44 b43851a4225m*** 3.3 10 12.5 56 42 22 38 65 b43851a4335m*** 4.7 10 12.5 40 30 16 45 77 b43851a4475m*** 6.8 10 16 27 21 11 60 102 b43851a4685m*** 10 10 20 18 14 7.4 81 138 b43851a4106m*** 22 12.5 25 8.4 6.3 3.4 140 238 b43851a4226m*** 33 12.5 25 5.6 4.2 2.2 168 286 b43851f4336m*** 47 16 25 4.0 3.0 1.6 210 357 b43851f4476m*** 68 18 31.5 2.7 2.1 1.1 294 500 b43851a4686m*** 100 18 35 2.3 1.7 0.90 364 619 b43851f4107m*** 100 20 30 1.8 1.4 0.74 371 631 b43851a4107m*** 150 20 40 1.2 0.92 0.49 490 833 b43851a4157m*** b43851 standard series 105 c page 17 of 36 please read cautions and warnings and important notes at the end of this document.
technical data and ordering codes b43851 c r 120 hz 20 c m f case dimensions d l mm esr max 120 hz 20 c w esr max 10 khz 20 c w z max 100 khz 20 c w i ac,r 120 hz 105 c ma i ac,max 120 hz 85 c ma ordering code (composition see below) composition of ordering code *** = version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ? 3 10 mm) 002 = for cut leads, bulk (for ? 3 10 mm) 003 = for crimped leads, blister (for ? 3 16 mm) 004 = for j leads, blister (from d l = 10 12.5 mm to 18 35 mm) 008 = for taped leads, ammo pack, lead spacing f = 5.0 mm (from d l = 6.3 11 mm to 12.5 25 mm) 009 = for taped leads, ammo pack, lead spacing f = 7.5 mm (from d l = 16 20 mm to 18 31.5 mm) 012 = for bent 90 leads, blister (for ? 16 and 18 mm) v r = 400 v dc 2.2 10 12.5 85 63 34 32 54 b43851a9225m*** 3.3 10 12.5 56 42 22 38 65 b43851a9335m*** 4.7 10 16 40 30 16 49 83 b43851a9475m*** 6.8 10 16 27 21 11 60 102 b43851a9685m*** 10 10 20 18 14 7.4 80 136 b43851a9106m*** 22 12.5 25 8.4 6.3 3.4 140 238 b43851f9226m*** 33 16 20 5.6 4.2 2.2 168 286 b43851f9336m*** 47 16 25 4.0 3.0 1.6 196 333 b43851f9476m*** 47 16 31.5 4.0 3.0 1.6 210 357 b43851a9476m*** 68 18 31.5 3.3 2.4 1.3 294 500 b43851f9686m*** 68 18 35 2.7 2.1 1.1 310 527 b43851a9686m*** 100 20 35 1.8 1.4 0.74 322 547 b43851a9107m*** 150 20 40 1.2 0.92 0.49 420 714 b43851a9157m*** v r = 450 v dc 2.2 10 12.5 85 63 34 24 41 b43851a5225m*** 3.3 10 16 56 42 22 32 54 b43851a5335m*** 4.7 10 16 40 30 16 35 60 b43851f5475m*** 4.7 10 20 40 30 16 40 68 b43851a5475m*** 6.8 10 20 27 21 11 53 90 b43851a5685m*** 10 10 20 26 19 10 56 95 b43851f5106m*** 10 12.5 25 18 14 7.4 63 107 b43851a5106m*** 22 12.5 25 14 10 5.4 100 170 b43851f5226m*** 22 16 25 8.4 6.3 3.4 115 196 b43851a5226m*** 33 16 25 7.6 5.7 3.0 125 213 b43851f5336m*** 33 16 31.5 5.6 4.2 2.2 133 226 b43851a5336m*** 47 16 31.5 4.8 3.6 1.9 155 264 b43851f5476m*** 47 18 31.5 4.0 3.0 1.6 185 315 b43851a5476m*** 68 18 35 2.7 2.1 1.1 193 328 b43851a5686m*** 100 20 40 1.8 1.4 0.74 207 352 b43851a5107m*** b43851 standard series 105 c page 18 of 36 please read cautions and warnings and important notes at the end of this document.
1) refer to chapter "general technical information, 5.3 calculation of useful life" for an explanation on how to interpret the useful life graphs. useful life depending on ambient temperature t a under ripple current operating conditions 1) v r = 6.3 ... 100 v dc v r = 160 ... 450 v dc b41851, b43851 standard series 105 c page 19 of 36 please read cautions and warnings and important notes at the end of this document.
frequency factor of permissible ripple current i ac versus frequency f v r 100 v dc frequency factor of permissible ripple current i ac versus frequency f v r 3 160 v dc b41851, b43851 standard series 105 c page 20 of 36 please read cautions and warnings and important notes at the end of this document.
taping, packing and lead configurations taping single-ended capacitors are available taped in ammo pack from diameter 5 to 18 mm as follows: lead spacing f = 2.5 mm ( ? d = 5 ? 6.3 mm) lead spacing f = 3.5 mm ( ? d = 8 mm) lead spacing f = 5.0 mm ( ? d = 5 ? 12.5 mm) lead spacing f = 7.5 mm ( ? d = 16 ... 18 mm). lead spacing 2.5 mm ( ? d = 5 ... 6.3 mm) last 3 digits of ordering code: 007 dimensions in mm ? d f h w w 0 w 1 w 2 h 0 p p 0 p 1 i 1 t d h d 0 5 2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0 6.3 toler- ance +0.8 02 0.75 0.5 min. 0.5 max. 0.5 1.0 0.2 0.5 max. 0.2 max. 0.2 b41851, b43851 standard series 105 c page 21 of 36 please read cautions and warnings and important notes at the end of this document.
lead spacing 3.5 mm ( ? d = 8 mm) last 3 digits of ordering code: 006 dimensions in mm ? d f h w w 0 w 1 w 2 p p 0 p 1 i 1 t d h d 0 8 3.5 18.5 18.0 12.5 9.0 1.5 12.7 12.7 4.6 1.0 0.7 1.0 4.0 toler- ance +0.8 02 1.0 0.5 min. 0.5 max. 1.0 0.2 0.5 max. 0.2 max. 0.2 b41851, b43851 standard series 105 c page 22 of 36 please read cautions and warnings and important notes at the end of this document.
lead spacing 5.0 mm ( ? d = 5 ... 8 mm) last 3 digits of ordering code: 008 lead spacing 5.0 mm ( ? d = 10 ... 12.5 mm) last 3 digits of ordering code: 008 dimensions in mm ? d f h w w 0 w 1 w 2 h 0 p p 0 p 1 i 1 t d h d 0 5 5.0 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 3.85 1.0 0.7 1.0 4.0 6.3 8 20.0 16.0 12.7 12.7 3.85 10 5.0 19.0 18.0 12.5 9.0 1.5 12.7 12.7 3.85 1.0 0.7 1.0 4.0 12.5 19.0 15.0 15.0 5.0 toler- ance +0.8 02 0.75 0.5 min. 0.5 max. 0.5 1.0 0.2 0.5 max. 0.2 max. 0.2 b41851, b43851 standard series 105 c page 23 of 36 please read cautions and warnings and important notes at the end of this document.
lead spacing 7.5 mm ( ? d = 16 ...18 mm) last 3 digits of ordering code: 009 dimensions in mm ? d f h w w 0 w 1 w 2 p p 0 p 1 i 1 t d p d h d 0 16 7.5 18.5 18.0 12.5 9.0 1.5 30.0 15.0 3.75 1.0 0.7 0 0 4.0 18 *) toler- ance 0.8 0.5 +0.75 0.5 min. 0.5 max. 1.0 0.2 0.5 max. 0.2 1.0 1.0 0.2 *) available only for case dimensions 18 20, 18 25 and 18 31.5 mm b41851, b43851 standard series 105 c page 24 of 36 please read cautions and warnings and important notes at the end of this document.
packing units and box dimensions ammo pack case size d l dimensions (mm) packing units mm a max b max c max pcs. 5 11 345 55 240 2000 6.3 11 345 55 290 2000 8 11.5 345 55 240 1000 10 12.5 345 55 280 750 10 16 345 60 200 500 10 20 345 60 200 500 12.5 20 345 65 280 500 12.5 25 345 65 280 500 12.5 25 345 65 280 500 12.5 30 345 65 275 500 16 20 315 65 275 300 16 25 315 65 275 300 16 31.5 315 65 275 300 18 20 315 65 275 250 18 25 315 65 275 250 18 31.5 315 65 275 250 b41851, b43851 standard series 105 c page 25 of 36 please read cautions and warnings and important notes at the end of this document.
kinked or cut leads single-ended capacitors are available with kinked or cut leads. other lead configurations also available upon request. kinked leads last 3 digits of ordering code: 001 with stand-off rubber seal case size dimensions (mm) d l (mm) a 0.5 10 20 5.0 12.5 20 5.0 12.5 25 5.0 12.5 30 5.0 12.5 35 5.0 12.5 40 5.0 16 20 7.5 16 25 7.5 16 31.5 7.5 18 20 7.5 18 25 7.5 18 31.5 7.5 18 35 7.5 18 40 7.5 20 20 10.0 20 25 10.0 20 40 10.0 22 30 10.0 22 35 10.0 22 40 10.0 with flat rubber seal b41851, b43851 standard series 105 c page 26 of 36 please read cautions and warnings and important notes at the end of this document.
cut leads last 3 digits of ordering code: 002 with stand-off rubber seal case size dimensions (mm) d l (mm) a 0.5 10 12.5 5.0 10 16 5.0 10 20 5.0 12.5 20 5.0 12.5 25 5.0 12.5 30 5.0 12.5 35 5.0 12.5 40 5.0 16 20 7.5 16 25 7.5 16 31.5 7.5 18 20 7.5 18 25 7.5 18 31.5 7.5 18 35 7.5 18 40 7.5 20 20 10.0 20 25 10.0 20 40 10.0 with flat rubber seal b41851, b43851 standard series 105 c page 27 of 36 please read cautions and warnings and important notes at the end of this document.
papr leads (protection against polarity reversal) these lead configurations ensure correct placement of the capacitor on the pcb with regard to polarity. papr leads are available for diameters from 10 mm up to 20 mm. there are three configurations available: crimped leads, j leads, bent 90 leads crimped leads last 3 digits of ordering code: 003 with stand-off rubber seal with flat rubber seal suggestion for pcb hole diameter case size dimensions (mm) d l (mm) b 0.2 c 0.5 d 0.1 e 0.1 a 0.5 ? b 16 20 1.5 3.0 1.3 0.3 7.5 0.8 0.05 16 25 1.5 3.0 1.3 0.3 7.5 0.8 0.05 16 31.5 1.5 3.0 1.3 0.3 7.5 0.8 0.05 18 20 1.5 3.0 1.3 0.3 7.5 0.8 0.1 18 25 1.5 3.0 1.3 0.3 7.5 0.8 0.1 18 31.5 1.5 3.0 1.3 0.3 7.5 0.8 0.1 18 35 1.5 3.0 1.3 0.3 7.5 0.8 0.1 18 40 1.5 3.0 1.3 0.3 7.5 0.8 0.1 20 20 1.5 3.0 1.6 0.3 10.0 1.0 0.1 20 25 1.5 3.0 1.6 0.3 10.0 1.0 0.1 20 40 1.5 3.0 1.6 0.3 10.0 1.0 0.1 b41851, b43851 standard series 105 c page 28 of 36 please read cautions and warnings and important notes at the end of this document.
j leads last 3 digits of ordering code: 004 suggestion for pcb hole diameter case size dimensions (mm) d l (mm) c 0.5 e 0.5 j 0.2 a 0.5 ? b 10 12.5 3.2 0.7 1.2 5.0 0.6 0.05 10 16 3.2 0.7 1.2 5.0 0.6 0.05 10 20 3.2 0.7 1.2 5.0 0.6 0.05 12.5 20 3.2 0.7 1.2 5.0 0.6 0.05 12.5 25 3.2 0.7 1.2 5.0 0.6 0.05 16 20 3.5 0.7 1.6 7.5 0.8 0.05 16 25 3.5 0.7 1.6 7.5 0.8 0.05 16 31.5 3.5 0.7 1.6 7.5 0.8 0.05 18 20 3.5 0.7 1.6 7.5 0.8 0.1 18 25 3.5 0.7 1.6 7.5 0.8 0.1 18 31.5 3.5 0.7 1.6 7.5 0.8 0.1 18 35 3.5 0.7 1.6 7.5 0.8 0.1 b41851, b43851 standard series 105 c page 29 of 36 please read cautions and warnings and important notes at the end of this document.
bent 90 leads for horizontal mounting pinning last 3 digits of ordering code: 012 case size dimensions (mm) d l (mm) c 0.5 e 0.5 f 0.5 a 0.5 ? b 16 20 4.0 4.0 12.0 7.5 0.8 0.05 16 25 4.0 4.0 12.0 7.5 0.8 0.05 16 31.5 4.0 4.0 12.0 7.5 0.8 0.05 18 20 4.0 4.0 13.0 7.5 0.8 0.1 18 25 4.0 4.0 13.0 7.5 0.8 0.1 18 31.5 4.0 4.0 13.0 7.5 0.8 0.1 18 35 4.0 4.0 13.0 7.5 0.8 0.1 18 40 4.0 4.0 13.0 7.5 0.8 0.1 bent leads for diameter 12.5 mm available upon request. b41851, b43851 standard series 105 c page 30 of 36 please read cautions and warnings and important notes at the end of this document.
1) available upon request overview of packing units and code numbers for case sizes 5 11 ... 16 31.5 papr case size d l stan- dard, bulk taped, ammo pack kinked leads, bulk cut leads, bulk crimped leads j leads bent 90 leads, blister mm pcs. pcs. pcs. pcs. pcs. pcs. pcs. 5 11 2000 2000 6.3 11 2500 2000 8 11.5 1000 1000 10 12.5 1000 750 1000 675 10 16 100 500 1000 675 10 20 500 500 500 500 500 12.5 20 350 500 350 350 300 1) 12.5 25 250 500 500 500 225 1) 12.5 30 200 500 175 175 180 1) 12.5 35 175 - 175 175 150 1) 12.5 40 175 - 175 175 150 1) 16 20 250 300 200 200 200 200 120 16 25 250 300 200 200 200 200 120 16 31.5 200 300 250 250 344 344 120 the last three digits of the complete ordering code state the lead configuration 000 code f (mm) d (mm) 001 002 003 004 012 006 007 008 009 3.5 2.5 5 7.5 8 5...6.3 5...12.5 16...18 b41851, b43851 standard series 105 c page 31 of 36 please read cautions and warnings and important notes at the end of this document.
overview of packing units and code numbers for case sizes 18 20 ... 25 40 papr case size d l stan- dard, bulk taped, ammo pack kinked leads, bulk cut leads, bulk crimped leads j leads bent 90 leads, blister mm pcs. pcs. pcs. pcs. pcs. pcs. pcs. 18 20 175 250 175 175 200 200 120 18 25 150 250 150 150 200 200 120 18 31.5 100 250 100 100 150 150 120 18 35 100 100 100 150 150 150 18 40 125 100 100 120 72 20 20 125 125 125 200 20 25 125 125 125 200 20 30 100 100 100 120 20 35 100 100 100 120 20 40 100 100 100 120 22 30 80 100 100 22 35 80 100 100 22 40 80 100 100 25 40 40 100 the last three digits of the complete ordering code state the lead configuration 000 code f (mm) d (mm) 001 002 003 004 012 007 008 009 2.5 5 7.5 4...6.3 6.3...12.5 16...18 b41851, b43851 standard series 105 c page 32 of 36 please read cautions and warnings and important notes at the end of this document.
cautions and warnings personal safety the electrolytes used by epcos have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. they do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (dmf) or dimethyl acetamide (dmac). furthermore, part of the high-voltage electrolytes used by epcos are self-extinguishing. they contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. as far as possible, epcos does not use any dangerous chemicals or compounds to produce operating electrolytes. however, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. however, the amount of dangerous materials used in our products has been limited to an absolute minimum. nevertheless, the following rules should be observed when handling al electrolytic capacitors: any escaping electrolyte should not come into contact with eyes or skin. if electrolyte does come into contact with the skin, wash the affected parts immediately with running water. if the eyes are affected, rinse them for 10 minutes with plenty of water. if symptoms persist, seek medical treatment. avoid breathing in electrolyte vapor or mists. workplaces and other affected areas should be well ventilated. clothing that has been contaminated by electrolyte must be changed and rinsed in water. b41851, b43851 standard series 105 c page 33 of 36 please read cautions and warnings and important notes at the end of this document.
product safety the table below summarize the safety instructions that must be observed without fail. a detailed description can be found in the relevant sections of chapter "general technical information". topic safety information reference chapter "general technical information" polarity make sure that polar capacitors are connected with the right polarity. 1 "basic construction of aluminum electrolytic capacitors" reverse voltage voltages polarity classes should be prevented by connecting a diode. 3.1.6 "reverse voltage" upper category temperature do not exceed the upper category temperatur. 7.2 "maximum permissible operating temperature" maintenance make periodic inspections of the capacitors. before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. do not apply any mechanical stress to the capacitor terminals. 10 "maintenance" mounting position of screw terminal capacitors do not mount the capacitor with the terminals (safety vent) upside down. 11.1. "mounting positions of capacitors with screw terminals" mounting of single-ended capacitors the internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. avoid any compressive, tensile or flexural stress. do not move the capacitor after soldering to pc board. do not pick up the pc board by the soldered capacitor. do not insert the capacitor on the pc board with a hole space different to the lead space specified. 11.4 "mounting considerations for single-ended capacitors" robustness of terminals the following maximum tightening torques must not be exceeded when connecting screw terminals: m5: 2 nm m6: 2.5 nm 11.3 "mounting torques" soldering do not exceed the specified time or temperature limits during soldering. 11.5 "soldering" b41851, b43851 standard series 105 c page 34 of 36 please read cautions and warnings and important notes at the end of this document.
topic safety information reference chapter "general technical information" soldering, cleaning agents do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. 11.6 "cleaning agents" passive flammability avoid external energy, such as fire or electricity. 8.1 "passive flammability" active flammability avoid overload of the capacitors. 8.2 "active flammability" reference chapter "capacitors with screw terminals" breakdown strength of insulating sleeves do not damage the insulating sleeve, especially when ring clips are used for mounting. "screw terminals - accessories" b41851, b43851 standard series 105 c page 35 of 36 please read cautions and warnings and important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic compon- ents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applica- tions requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. the warnings, cautions and product-specific notes must be observed . 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as ?hazardous?) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the ?general terms of delivery for products and services in the electrical in- dustry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, epcos-jones, baoke, alu-x, ceradiode, cssp, mlsc, phasecap, phasemod, siferrit, sifi, sikorel, silvercap, simid, siov, sip5d, sip5k, ultracap, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. important notes page 36 of 36

▲Up To Search▲

Price & Availability of B41851F8686M000

	To Download B41851F8686M000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .